3 DAY COLLECTOR SELECT FIREARMS AUCTION, APRIL 17, 18, & 19 2026

FOR MODEL 1903, MODEL 1903A3 AND 22 CALIBER TRAINING RIFLES. 1) Model 1903 S Type Straight Grip Walnut Stock w/ High Hump Handguard. Stock w/ single r

HANDGUARDS. (Barrels). No.1: 30-06. US Remington. Marked behind front sight "RA / flaming bomb / 2-44". 24" barrel is fitted w/ front...

ACTION RIFLE STOCKS AND 14 HANDGUARDS. These stocks were removed from rifles & most have arsenal rework finishes, or finishes that are in some s...

HANDGUARDS. 14 of the stocks are straight grip while 3 are scant grip. 4 of the straight grip stocks have handguards. Stocks have both reinforcing bol

RIFLE STOCKS AND 25 HANDGUARDS. The stocks are all walnut, S-type & straight grip. These stocks were removed from rifles, having seen extensive ...

BOLT-ACTION RIFLE STOCKS AND 26 HANDGUARDS. Stocks are predominantly walnut w/ one or two exceptions. 34 of the stocks are straight grip, 13 are scant

ACTION RIFLE STOCKS AND PARTS. Stocks include model 1903A4. Buttstock is marked in cutoff recess w/ "K". Stock made w/ two recoil bolts &a...

No.1: Walnut Reproduction Highwood oval-cut stock. Stock is marked faintly in sling slot "JMB". No hardware included. CONDITION: stock has...

Stocks are generally w/o metal parts, some are w/ handguards. No.1: Low wood oval-cut walnut stock w/ handguard. Stock is marked "W" in sl...

Most of these stocks appear to be of US origin & have US markings. Many of these markings will be faint due to arsenal reworking. The stocks app...

BUTTSTOCKS, FRONT AND REAR HANDGUARDS. 19 buttstocks are walnut, 6 are hardwood. Stocks are mostly unmarked & have varying degrees of finishes, ...

HANDGUARDS AND FRONT HANDGUARDS. 16 buttstocks, 22 rear handguards & 27 front handguards. Stocks & handguards are predominantly from well-us...

These buttstocks are nearly all walnut & unmarked. Many retain some of their original metal fittings, including ferrules, swivels & buttplat...

15 of the stocks are walnut, one appears to be birch replacement. 3 walnut stocks w/ cheek pads are consignor labeled to have been taken from MID snip

MILITARY RIFLE HANDGUARDS. The handguards are a mix of US & foreign manufacture. Many are walnut. These handguards appear to be removed from rif...

These buttstocks appear to have been removed from imported rifles & have seen extensive hard service. Many if not most of the stocks are of unkn...

These buttstocks appear to have been removed from imported rifles & have seen extensive hard service. Many if not most of the stocks are of unkn...

MILITARY RIFLE HANDGUARDS. The handguards are a mix of US & foreign manufacture. Many are walnut. These handguards appear to be removed from rif...

AND FOREIGN STOCKS AND HANDGUARDS. 1) U.S. Model 1917 Walnut Stock Set. Stock is marked at the tip of the forend w/ "W" indicating Winches...

1) Four brown synthetic GI issue M14 stocks. Stocks have the later production "checkering". Stocks may be equipped with sling swivels, one...

Stocks are predominantly for a wide variety of Mauser type rifles from various manufacturers. Group contains seven SKS type stocks and five British pa

TRIGGER GUARD ASSEMBLIES AND TRIGGER HOUSINGS. Very large group of M1 Garand trigger guard assemblies & stripped trigger housings. Trigger guard...

Many of the cylinders have front sights, stacking swivels, gas cylinder locks & gas cylinder lock screws. CONDITION: all appear to be used w/ mo...

Included is a large quantity of assorted M1 Garand rifle parts to include milled & stamped trigger guards, bullet guides, follower arms, clip la...

The lot consists of 12 barrels for the M-1 Garand military rifle. Three are 7.62 NATO (.308) and nine are in .30-06 caliber. All are 24" in len...

ASSEMBLIES AND STRIPPED TRIGGER GUARDS BY WINCHESTER, INTERNATIONAL HARVESTER CORPORATION AND HARRINGTON & RICHARDSON ARMS. No.1: Winchester. 16...

OPERATING RODS. All rods have the safety notch, 6 have original protective wrapping at the forward end. CONDITION: rods range from well-worn w/ little

Rods are all "WRA" marked w/ drawing numbers. 15 rods have the slant cut ahead of the operating handle & 2 rods have a vertical cut. C...

BOLTS. 40 bolts consisting of 3 new in original unmarked wrapper, 14 complete assemblies & 23 stripped w/ no additional parts. CONDITION: ranges...

INTERNATIONAL HARVESTER CORPORATION AND HARRINGTON & RICHARDSON ARMS. 1) Winchester. 11 stripped bolts. 2) International Harvester Corporation. ...

OPERATING RODS WITHOUT THE SAFETY NOTCH. 24 Springfield marked M1 Garand operating rods. These rods were produced w/ the original square notch &...

RODS. Rods are all manufactured w/ the safety notch & are all marked "SA" w/ drawing numbers. Six of the rods have additional "NM...

SCABBARDS. Scabbards are similar to the Model 1918, except for the guide made to accommodate the M1 Garand charging handle. These scabbards were origi

RODS. No.1: Harrington & Richardson Arms. 12 operating rods, all marked w/ "HRA" & drawing number. CONDITION: 2 new & unissued...

EN BLOC CLIPS. Approx. 300 are packed in 100 round cardboard boxes. The balance are thrown loose in a box approx. 12" x 12" x 5" deep...

SIGHT PARTS. Lot includes numerous front and rear sight parts. The rear sights include both locking bar & T105E1 types. Parts include elevation,...

GARAND RIFLE OPERATING RODS. These rods were manufactured by Remington Arms for the Type 2 National Match rifles. They were given a special curvature

No.1: 17 Springfield Armory "SA" marked barrels w/ a wide variety of dates. Most are post-WWII. / No.2: 11 Line Material Corporation "...

33 are US-made trapdoor type in well-worn, but serviceable condition. 10 trapdoor type buttplates have extensive wear & do not appear serviceabl...

RODS. Most if not all follower rods are the long fork type. Springs show considerable wear w/ many kinking issues. (02-24590-25/RW). NON-GUN. $300-500

Possible to have a 1903 part mixed in. Condition varies from good to very good useful parts; some appearing like new. No signs of oxidation, excessive

Metal components for 1903's (possible 03-A3 inclusion) that are all in good serviceable condition (some better) with some specific conditions li...

STOCKS, BARRELS AND PARTS. (Stocks). No.1: BM59 walnut stock. Stock is unmarked, except for "10" rack number. CONDITION: worn arsenal rewo...

Nearly all of these barrels have been taken from rifles. The majority are threaded and chambered for Model 98 Mauser actions. Barrels may include sigh

These scabbards are for the Model 1903 Springfield bolt-action rifle. Scabbards measure approximately 33 1/2" long & are equipped w/ four l...

MAGAZINES. 15 ROUND: 74 mags. 64 are blued steel, one is parkerized and nine are in original sealed wrappers. They all appear to have contract marking

This lot consists of the following bayonets: 1) British P1907 bayonet. Bayonet has 1916 & 1934 dates but maker's marking is illegible. Scabb...

This lot consists of the following bayonets: 1) British No. 4 Bayonet. British No.4 spike bayonet with scabbard. Markings are illegible. Metal of bay

This lot consists of the following: 1) National Denki T30 Bayonet. Blued blade has Kokura & National Denki markings. Hooked crossguard. Scabbard...

This lot consists of the following bayonets: 1) Unmarked Socket Bayonet. No locking ring. Overall length 17" with 13 1/2" blade. CONDITION...