Poulin Auctions Online, Absentee & Phone Bidding Auction

22.5" Overall, 18" spearpoint blade, chestnut wood grip. CONDITION: very good overall, dark iron patina, tight well fit grip, insect holes...

17" Overall, 12" double edged blade, 4.5" blacksmith made crossguard with curled ends, grip reutilized from turned walnut tool handle...

14" Overall, 9.5" heavy clip point blade, iron “S” shaped cross guard in style of Leech & Rigdon bowies, wood grip, iron c...

17.5" Overall, 13.25" double edged blade, possibly from pike, 4" tapered iron crossguard, pinned wood slab grips. Knife has great loo...

Overall: 22 3/4". Clip point 18 1/2" blade. Right side of blade has carved sunburst & wheat chaff style motifs, left side has wheat ch...

OFFICER SWORD. The unique pattern of which very few examples are documented are much larger than normal CS or US foot or staff officer swords, 33&qu...

84.4 x 48.1mm, Cast brass, similar to plates 266-268, pages 148-149 Mullinax, Confederate Buckles & Plates, Expanded Version, 1991. UNATTACHED A...

72 x 45.7mm, Cast brass, similar to plates 129-132, pages 76-77 Mullinax, Confederate Buckles & Plates, Expanded Version, 1991. UNATTACHED ACCES...

Heavy wide 35.5" unstopped fuller blade, 1860 style hilt, soldered lap seamed Columbus Georgia brass mounted scabbard. CONDITION: good to very ...

Classic “Dog River” saber made by the largest sword factory in Georgia. Characteristic Haiman features, heavy 36" unstopped forward

25" overall, 18.75" double edged blade, 2" wide. Unique to this pattern is crosshatched wood grip with bulbous top, brass ferrule &am...

23.5" overall, 18.25" wasp waist blade with medial ridge, 5.5" “S” shaped iron cross guard. There are several variants kn...

SWORD. 30" Unstopped fullered blade, thin brass 3 branched hilt with brass ferrule and spiral carved wood grip. Looks like this is right out of...

36" blade marked “PS JUSTICE / PHILADA” on pen-knife ricasso. Hilt, grip, & pommel from small pommel variety Froelich cavalry s...

SABER. 35.25" unstopped fuller blade, rounded back edge, sharp point. Classic Louis Froelich, Kenansville, North Carolina pointed hilt and plai...

Classic "Dog River" saber made by the largest sword factory in Georgia. Characteristic Haiman features, heavy 35.75" unstopped fuller...

Anonymous Confederate copy of 1840 cavalry saber, 34" unstopped fullered blade, sand cast hilt and pommel. CONDITION: good to very good overall...

27.5" overall, 21" slight wasp waist blade, 4.5" heavy iron cross guard, handle is repurposed turned wood tool handle with small Germ...

Unmarked 24.5" overall, 19" heavy dagger point blade with medial ridge, slight wasp waist, solid cast feathered grip, in style of US model...

Cal. 54. NSN. Bbl. 8". Brass blade front w/ oval shaped rear sight on tang. 1841 Dated lock. Swivel ramrod & brass flashpan w/ balance iron...

Cal. 54. NSN. Bbl. 8 1/2". Brass blade front sight & oval shaped rear sight on tang. 1838 Dated lock. Swivel type steel ramrod w/ button sh...

Cal. 54. NSN. Bbl. 8". Mfg. 1851 w/ brass blade front & simple notch rear sight on hammer. Lock & tang both dated 1851. “US/GW/P&...

PISTOL. Cal. 54. NSN. Bbl. 9 1/16" smoothbore. Trade style bolster conversion w/ trade style hammer. Hardwood stock w/ iron furniture. Replacem...

NORTH. Cal. 54. NSN. Bbl. breech, stock & lock show reconversion from percussion to flintlock; lock mainspring appears modern w/ other sm. parts...

Cal 54. NSN. Bbl. 9". Approximately 20,000 Mfg. circa 1817-1820. Fixed brass front sight blade atop single bbl. band. Lock marked “S NORT...

Cal. 58. NSN. Bbl. 40". 3 Notch flip up rear sight. Stud type front sight. Beveled lockplate dated "1864" marked U.S. COLT'S PT F...

LOADING RIFLE MUSKET. Cal. 58. NSN. Bbl. 40" w/ 3 notch rear sight. Stud type front sight. These Trenton marked guns were contracted by J.T. Ho...

Cal. 58. NSN. Bbl. 40". Fixed front & ladder folding leaf w/ slider adjustable rear sight. One piece stock secured by 3 bbl. bands. Lock da...

CONVERSION OF US SPRINGFIELD MODEL 1816 FLINTLOCK MUSKET WITH BAYONET. Cal. 69. NSN (mfg. 1826 & converted 1862). Smoothbore 42" bbl. w/ &q...

MUSKET. Cal. 69. NSN (1844). Bbl. shortened to 32 1/2"; facsimile of Artillery Musketoon. Springfield 1844 dated lock. Two band walnut stock w/...

Cal. 69. NSN. Bbl. 42" w/ smoothbore. Harpers Ferry marked conversion lock is dated 1840. 3 Band fastened walnut stock with iron furniture &...

MUSKET. Cal. 69. NSN (1812). Bbl. 44 1/4". 1812 Dated lock w/ replacement parts including frizzen spring, hammer screw & jaw screw. 3 Band ...

Cal. 50. NSN. Bbl. 21" missing sights. Back action lock plate & hammer appear to be inappropriate replacements. Action has replacement sadd...

Cal. 58. NSN. Bbl. 40". This interesting gun appears to be a US M1855 musket fitted with an excavated Richmond lockplate & hammer. The barr...

Overall length 32 1/4". Blade length 25 7/8". Plain blade with a single wide fuller. Ricasso is marked “Made by AMES MFG CO CHICOPEE...

OFFICER'S SWORD TO LT. CHARLES BEMENT. Overall length: 37 3/4". Blade length: 30 3/4". Blade has a raised medial ridge with gold highl...

Overall length: 35". Blade length: 28 1/2". Blade has a single wide fuller with a single narrow fuller near the spine. Blade is etched ove...

BAETZEL OF CO. D 54TH NEW YORK. Overall length: 38". Blade length: 31 1/2". Blade has a single wide fuller and a secondary fuller near the...

Overall length: 38 1/8". Blade length: 31 1/4". Blade is elliptical in cross section and etched over half its length with various military...

Overall length: 41". Blade length: 34". Quillback blade etched on one side “United States” over a swag of leaves. The blade ha...

Beautiful imported non-regulation cavalry officer saber, 35" blade has etched decoration, brass branched hilt with large American eagle, stars,...

Overall length 26". Blade length 19 1/8". Blade has a single 10 1/2" fuller above 2 fullers measuring 3 3/4". The ricasso is mar...

Overall length: 38". Blade length: 30 7/8". This sword has a mismatched Ames blade with a Roby scabbard. The blade has a single wide fulle...

Overall length: 39". Blade length: 32 1/8". Blade has a single wide fuller and is etched over half its length with various military, patri...

SCABBARD. Mfg. in West Chelmsford, Mass w/ 1865 date & "AGM" inspector stamp on left ricasso. Overall length: 42 1/2". Blade leng...

Overall length 32". Blade length 25 7/8". Blade has a single wide fuller and is marked at the ricasso “Made by AMES MFG CO CHICOPEE ...

Overall length: 32". Blade length: 26". Plain blade with a single wide fuller and marked at the ricasso “Made by AMES MFG CO CHICOPE...

Overall length 44”. Blade length 34 7/8”. Blade has a single wide fuller with an 18" narrow fuller near the spine. The ricasso is ma

Overall length 42 1/4". Blade length 35". Blade has a single wide fuller with an 18" narrow fuller near the spine. Blade is marked at...

Overall length: 37 1/4”. Blade length: 30”. This is a post-Civil War era M1860 with a plain blade that is diamond in cross section a

Overall length: 37”. Blade length: 30”. This is a post-Civil War era M1860 with a plain blade that is diamond in cross section and a

Overall length: 43". Blade length: 35". This saber appears to be a factory refurbished saber. The blade is in fine condition, but the mark...

Overall length: 42 1/2". Blade length: 34 5/8". Blade has a single wide fuller with a single narrow fuller near the spine. The ricasso is ...

Overall length 38 3/8". Blade length 32". A nice example of an import M1850 with no makers mark on the blade. The blade is lightly etched ...

Overall length: 35 1/8". Blade length: 29". Plain blade with a single wide fuller & unmarked ricasso. Gilded brass hilt with pierced g...

Overall length: 40”. Blade length: 31 1/4". Blade has a single wide fuller with a single narrow fuller near the spine. The blade has vest...

Overall length: 37 1/2”. Blade length: 31". Blade has a single wide fuller with a single narrow fuller near the spine. The blade is stamp...

Overall length: 37”. Blade length: 31 3/8". Blade has a single wide fuller with a single narrow fuller near the spine. The blade has vest...

SWORD. 30.5" slightly curved unmarked blade with short Ames-like ricasso. Uncleaned rich patina throughout. CONDITION: very good overall, blade...

30.5" Blade with Ames-like short ricasso, well patinaed burl wood grip missing ferrule and wrap. CONDITION: blade heavily ground, pitted, light...

30.25" patriotic etched blade: “TIFFANY & CO / NEW YORK” & “WARRANTED TO CUT / WROUGHT IRON”. Tiffany imported ...

SWORD. Import foot sword marked “Horstmann” & “Philadelphia” on either quillon of 29" blade. Brass mounted leather

Overall length: 39 1/4". Blade length: 31 1/2". Blade has a single wide fuller with a single narrow fuller near the spine. Blade is etched...

SWORD BY CLAUBERG. Overall length: 40". Blade length: 32 1/2". Blade has a single wide fuller with an 8 1/2" etched area on each side...

Overall length 26 5/8". Blade length 21". Plain blade with a raised medial ridge marked at the ricasso “N.P. AMES CABOTVILLE MASS...

Overall length: 43". Blade length: 35 1/2". This imported saber has a single wide fuller with a single narrow fuller near the spine. Brass...

Overall length: 42 1/2". Blade length: 35 1/2". Blade has a single wide fuller with a narrow fuller near the spine. The ricasso is stamped...

Overall: 37.5". Fullered 31 1/2" blade. Brass hilt, grip & guard. CONDITION: blade & brass have fair cleaned appearance. Blade sho...

Overall length: 41". Blade length: 35 1/2". This imported saber features a blade with a single wide fuller & a single narrow fuller ne...

SWORD KNOT. 36" heavy cavalry blade stamped on top edge with proofs & “S&K” for Schnitzler & Kirschbaum of Solingen who...

WILLIAM GLAZE MARKS. Overall length 43 5/8". Blade length 36". Blade has a single wide fuller with a 20" narrow fuller near the spine...

Overall length: 41". Blade length: 35 1/4". Blade has a single wide fuller with a narrow fuller near the spine. The ricasso is stamped ...

Overall length 24 1/2". Blade length 18 1/4". Plain blade with a single 10 1/4" fuller and two 3 1/4" fullers. Blade is marked &...

25.5" Overall, 19" double edged, triple fullered blade: "N. P. AMES / SPRINGFIELD" &"UNITED / STATES / 1835" on ei...

Overall length: 26 1/4". Blade length: 19 1/8". Blade has a single 10 1/4" fuller with two 3 1/2" fullers near the hilt. The bla...

Overall length: 40". Blade length: 34 1/4". Plain quillback blade etched near the ricasso “United States” over a swag on one s...

SWORD. Overall: 38". Fullered 32" blade marked "EMERSON / & / SILVER / TRENTON" & "US / DFM / 1863". Brass hil...

Overall length: 42". Blade length: 34 1/2". Blade has a single wide fuller with a single narrow fuller near the spine. The ricasso is stam...

1) Overall length 32 1/8". Blade length 26". Plain blade with a single wide fuller marked at the ricasso “Made by AMES MFG CO CHICOP...

1) Overall length 39". Blade length 31 1/2". Plain blade with a single wide fuller marked at the ricasso “U.S. DFH 1863” &

1) CAVALRY SABER. A good example of a US M1840 cavalry saber measuring 43” overall with a 36” blade. Plain blade with a single wide

SCABBARDS. This group includes 1 saber measuring 29" in length with the bottom part of the blade missing. Brass hilt and a partial leather and ...

1) US M1872. Overall length: 40". Blade length: 34". Plain blade with a single medium fuller and no maker’s mark. Brass 2 branch gua...

This lot has 7 complete leather officer scabbards, each with 3 brass mounts, several have Confederate features that would display well on Confederate

16 3/4" Overall, 12" heavy blade w/ 5 1/2" clip point. “AMES MFG CO / CHICOPEE / MASS” on one ricasso & the other ...

FOR 1861 PLYMOUTH RIFLE. 16.75" Overall, 12" heavy blade w/ 5 1/2" clip point. “AMES MFG CO / CHICOPEE / MASS” on one ric...

16.5" Overall, 12" heavy blade w/ 5 1/2" clip point. “AMES MFG CO / CHICOPEE / MASS” on one ricasso & the other ̶...

Overall length of bayonet: 24 7/8". Blade length: 20 1/4". Plain blade with a single wide fuller stamped at the ricasso “COLLINS &am...

Overall length of bayonet: 26 5/8". Blade length: 21 13/16". Plain blade with a single wide fuller stamped at the ricasso “Made by A...

Overall length of bayonet: 24 7/8". Blade length: 20 1/8". Plain blade with a single wide fuller and an “S” stamp at the ricas...

24" overall, 19" blade, Possibly Confederate used, fits unknown 1841/1855 style rifle, .079" barrel ring diameter, “7287”...

Overall: 30". Fullered 25 1/2" sword yataghan blade marked on right ricasso "SC2". Brass handle, crossguard & muzzle ring. L...

Overall: 24 3/4". Blade 20". Brass hilt w/ .87" muzzle ring diameter. CONDITION: poor blade showing patina, pitting & oxidation. ...

Overall: 30 1/2". Blade 25 1/2". S# 8578 on brass hilt. Punch stamped "FK" on right side pommel. CONDITION: blade has gray patin...

HANKINS NAVAL Overall: 24 7/8". Blade: 20 1/4" w/ "1861" date & "COLLINS & CO / HARTFORD / CONN" on ricassos. ...

BAYONETS. 1) 20" Fullered Yataghan blade bayonet. 24 5/16" overall. 1 Piece cast brass ribbed handle w/ muzzle ring & birdshead pommel...

19.5" Overall, 14.75" blade most likely made from heavy sword, .24" thick, 1.4" wide. Hand forged D guard with well patinaed bon...

11.5" Overall, 8" spearpoint with 3" sharpened false edge, “R. BUNTING / & SON / SHEFFIELD” stamped on ricasso, stag ...

Overall: 16 3/8". Clip point 11 3/4". Oval shaped guard. Wood grip w/ brass ferule & pommel. CONDITION: blade fair condition w/ corros...

11.5" Overall, 7" clip point bowie maker marked “JOHN / HUDSON / SHEFFIELD” on ricasso. CONDITION: very good overall, blade is...